Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4 battery- or phantom-powered shotgun microphone. Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production. The elevated sensitivity of the NTG4 allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4 delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter. A switchable treble boost is on hand for situations where additional clarity is needed. Quality Sound Capture The combination of the 10.9″ long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones. Internal Battery or Phantom Powered Operate the NTG4 on 48V phantom power or via its internal rechargeable lithium battery, which provides up to 150 hours of run time. The micro-USB port and supplied USB cable enable easy recharging in just two hours—charge the NTG4 via a computer, power brick, or vehicle. Thanks to its 3-pin XLR output, the NTG4 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. Customizable Tone via Digital Switching Digital switching not only allows for intuitive access to the mic’s settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the 6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level. Ideal for Boompole Mounting The lightweight, metal-bodied NTG4 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications. Windscreen Minimizes Wind Noise The NTG4 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system Specification Polar Pattern Supercardioid Element Type Condenser Controls High Boost, On/Off, Pad, Low Cut/HPF Frequency Response 20 Hz to 20 kHz Maximum SPL 135 dB Analog Output 1x XLR 3-Pin Power Sources Phantom Power Microphone Polar Pattern Supercardioid Element Type Condenser Sound Field Mono Diaphragm 0.5″ / 12.7 mm Orientation End Address Controls High Boost, On/Off, Pad, Low Cut/HPF Pad -10 dB Filter & EQ Low-Cut Filter: 75 Hz High Boost: 6 dB Circuitry Solid-State Performance Frequency Response 20 Hz to 20 kHz Maximum SPL 135 dB Off-Axis Rejection 5 dB at 60° 24 dB at 120° 18 dB at 180° Sensitivity -32 dBV/Pa (at 1 kHz) Dynamic Range 119 dB Equivalent Noise Level 16 dB (A-Weighted) Connectivity Analog Output 1x XLR 3-Pin Power Power Sources Phantom Power Operating Voltage 48 V Battery Type 1x Built-In (Included) Physical Color Black Mounting Thread Size 5/8″-27 Female (3/8″-16 Female with Included Adapter) Dimensions ø: 0.87 x L: 10.94″ / ø: 22 x L: 278 mm Weight 6.21 oz / 176 g (Microphone) Packaging Info Package Weight 1.36 lb Box Dimensions (LxWxH) 13 x 5.15 x 2.6″
